ABS-Like Resin

ABS-Like Resin Introduction:

ABS-Like Resin is one enhanced acrylic resin. Good strength and toughness are its special advantages. It can be used for both LCD and DLP 3d printers.

OPY ABS-Like Resin Main Features:

1. Good Toughness:

          Improvement on Elongation at Break bring good toughness.

2. Better Strength: 

          Increase Flexural Modulus and Flexural Strength, and make model stronger.

3. More Precision:

          Reduce Shrinkage to 0.2~0.5%, come out more accurate dimension of Model.

4. Easy Printing:

          Proper Viscosity and good fluidity let print simply.

5. Wide compatibility:

          Suitable for assorted SLA/DLP 3D printer, Formlabs, Anycubic, Creality, Elegoo and etc

OPY ABS-Like Resin Specification:​​​​​​

1. Material: ABS-Like Resin
2. Color: White, Black, Grey, Clear, Beige
3. Hardness: 82 Shore D
4. Recommend Wavelength: 405mm
5. Layer Thickness: 0.05mm
6. Normal Exposure Time: 2~3s
7. Off Time: 0.5s
8. Bottom Exposure Time: 23~30s
9. Bottom Layers: 4~6
10. Anti-alias: 1
11. Z Lift Distance: 6mm
12. Z Lift Speed: 2~6mm/s
13. Z Retract Speed: 3~6mm/s
14. Net Weight: 1KG
15. Gross Weight: 1.21KG
16. Warranty: one year

OPY Printing Tips:

1. Shake before use.
2. Wear gloves and mask during using.
3. Avoid direct contact with skin.
4. Wash with clean water after contact.
5. Keep away from Children and pets.
6. Storage:

          a) Avoid light.

          b) Screw the bottle cap on after use.

          c) Best room temperature: 20~30℃.