Water Washable Resin
Water Washable Resin Introduction:
Water Washable Resin is one type acrylic resin. It can be directly cleaned by water, which save a lot alcohol cost. Easy to print and good strength are its special advantages. It can be used for both LCD and DLP 3d printers.
OPY Water Washable Resin Main Features:
- Water Washable:
Easy to clean by water and save alcohol cost.
- Faster Print:
Lower Viscosity (100~200 cps) increases material fluidity, and shorten normal exposure time to 1.5~2.5s, which finally speed up printing.
- Good Strength:
Excellent Flexural Modulus and Flexural Strength make model very strong.
- High Precision:
Low Shrinkage (only 0.2~0.7%) brings accurate dimension of Model.
- Wide compatibility:
Suitable for assorted SLA/DLP 3D printer, Formlabs, Anycubic, Creality, Elegoo and etc.
OPY Water Washable Resin Specification:
- Material: Water Washable Resin
- Color: White, Black, Grey, Clear, Beige
- Hardness: 84 Shore D
- Recommend Wavelength: 405mm
- Layer Thickness: 0.05mm
- Normal Exposure Time: 1.5~2.5s
- Off Time: 0.5s
- Bottom Exposure Time: 20~25s
- Bottom Layers: 4~6
- Anti-alias: 1
- Z Lift Distance: 6mm
- Z Lift Speed: 2~6mm/s
- Z Retract Speed: 3~6mm/s
- Net Weight: 1KG
- Gross Weight: 1.21KG
- Warranty: one year
OPY Printing Tips:
- Shake before use.
- Wear gloves and mask during using.
- Avoid direct contact with skin.
- Wash with clean water after contact.
- Keep away from Children and pets.
- Storage:
a) Avoid light.
b) Screw the bottle cap on after use.
c) Best room temperature: 20~30℃.
