PETG / PETG+ Filament

PETG Filament Introduction:

PETG (Acrylonitrile Butadiene Styrene) is modified compound based on PET. PETG adds cyclohexane dimethanol (CHDM) to the polymer backbone in place of ethylene glycol, resulting to much larger (6 additional carbon atoms) than the ethylene glycol unit it replaces, it does not fit in with the neighboring chains the way an ethylene glycol unit would. This interferes with crystallization and lowers the polymer's melting temperature. PETG is a clear amorphous thermoplastic that can be injection molded, sheet extruded or extruded as filament for 3D printing. It can be colored during processing.

PETG Pro (PETG+) Main Features:

1.    Easy printing:
      Very easy to print even no heating bed, surface is smooth and glossiness.
2.    Good strength:
      Strength of PETG is better than PLA and similar to ABS.
3.    Wide range temperature from 220 ℃ ~250 ℃:
      Suitable for assorted 3D printer, Makerbot, UP, Luzbot, Leapfrog, Reprap, Ultimaker, Mendel, Prusa, Raise3D and etc.
4. Good layer adhesion.

OPY PETG Pro (PETG+) Advantages:

1. Smooth surface
2. Fast printing 60-90mm/s
3. Less string

OPY PETG Pro (PETG+) Specification:

1. Item Name: PETG Pro Filament
2. Color: Transparent, Red, Green, Blue
3. Diameter: 1.75 mm
4. Diameter tolerance: ±0.05 mm
5. Print temperature: 220 ~ 250 ºC
6. Hot bed temperature: 0 ~ 50 ºC
7. Infill Speed: 20 ~ 50 mm/s
8. Net Weight: 1 kg/roll
9. Gross Weight: 1.3 kg/roll